NETTECH

General
Device Type:	Router
Form Factor:	External
Width:	12.8 in
Depth:	9.8 in
Height:	1.7 in
Memory
RAM:	256 MB (installed) / 768 MB (max)
Flash Memory:	128 MB
Networking
Connectivity Technology:	Wired
Integrated Switch:	4-port switch
Data Link Protocol:	Ethernet, Fast Ethernet
Switching Protocol:	Ethernet
Network / Transport Protocol:	L2TP, IPSec
Routing Protocol:	RIP-1, RIP-2, HSRP, VRRP, GRE
Remote Management Protocol:	Telnet, SNMP 3, HTTP, HTTPS, SSH
Capacity:	IPSec VPN tunnels : 20
Status Indicators:	Port status, power
Features:	NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), MAC address filtering, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control
Compliant Standards:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x
Expansion / Connectivity
Expansion Slots Total (Free):	1 ( 1 ) x ExpressCard , 1 ( 1 ) x memory
Interfaces:	4 x network, Ethernet 10Base-T/100Base-TX, RJ-45 , 1 x management, console, RJ-45 , 1 x network, Ethernet 10Base-T/100Base-TX, RJ-45 ( WAN ) , 1 x USB, 4 pin USB Type A
Miscellaneous
Encryption Algorithm:	LEAP, DES, Triple DES, MD5, TLS, PEAP, TTLS, TKIP, WPA, WPA2, WPA-PSK, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Authentication Method:	RADIUS, TACACS+
Compliant Standards:	VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Power
Power Device:	Power adapter, external
Voltage Required:	AC 120/230 V ( 50/60 Hz )
Power Provided:	60 Watt
Software / System Requirements
OS Provided:	Cisco IOS Advanced Security
Environmental Parameters
Min Operating Temperature:	32 °F
Max Operating Temperature:	104 °F
Humidity Range Operating:	10, 85%