| Manufacturer |
Cisco |
| Manufacturer Part # |
WS-C2950T-24 |
| Device Type |
10/100BaseTX Ethernet Switch |
| Enclosure Type |
1U 19" Rack-mountable
1U 24" Rack-mountable
Wall-mountable
Desktop |
| Memory |
16 MB DRAM, 8 MB Flash Memory |
| Networking |
Connectivity Technology
|
10/100BaseTX Wired Ethernet |
|
Data Transfer Rate
|
10Mbps Ethernet (Half/Full-duplex)
100Mbps Fast Ethernet (Half/Full-duplex)
1Gbps Gigabit Ethernet Uplink Only (Half/Full-duplex)
|
|
Remote Management
|
- SNMP
- Telnet
- RMON
- CWSI
- (CLI)-based out-of-band
- embedded CMS
|
|
Remote Management Protocol
|
IGMP, PVST+, PAgP, VTP, DTP, TFTP, NTP, CMP, LACP |
|
Communication Mode
|
Full-Duplex, Half-Duplex |
|
Status Indicators
|
Port status, link activity, port transmission speed, port duplex mode, bandwidth utilization %, power |
|
Features
|
- Enhanced Software Image (EI) installed
- Filtering of incoming traffic flows based on Layer 2, Layer 3, or Layer 4 ACPs prevents unauthorized data flows.
- Private VLAN edge
- IEEE 802.1x for dynamic port-based security.
- STRG
- The STP PortFast/ BPDU guard
- TACACS+ and Remote Access Dial-In User Service (RADIUS) authentication
|
|
Compliant Standards
|
IEEE 802.3
IEEE 802.3U
IEEE 802.1D
IEEE 802.3ab
IEEE 802.1p
IEEE 802.3ad (LACP)
IEEE 802.1w
IEEE 802.1x
IEEE 802.1s |
| Interfaces |
Interfaces
|
24 x network node - Ethernet 10Base-T/100Base-TX - RJ-45
2 x network host - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 |
|
Power
Requirements
|
Power Supply
|
Internal |
|
Voltage
|
100 to 127 or 200 to 240 VAC (auto-ranging), 50 to 60 Hz
|
|
Consumption
|
30 Watts Maximum |
|
Other Features
|
135,000 Hours MTBF |
|
Dimensions
(H X W X D)
|
Unit
|
1.72 x 17.5 x 9.52 in.
|
|
Weight
|
Unit
|
6.5 lbs |
dungtran@nettech.vn
